NEC Express5800/R110f-1E Manuel d'utilisateur télécharger pdf (Page 65)

raidcmd

Step 1

Execute "hotspare" command with –mr

option and the following parameters.

-c : Number of the RAID Controller containing the Physical

Device with which a Hot Spare is made

-p : Number of the Physical Device with which a Global

Hot Spare is made

-mr : Specify "make" to make Global Hot Spare

Ex. Create a Global Hot Spare using the Physical

Device with RAID Controller:1 and Physical Device

number:e252s5.

raidcmd hotspare -c=1 -p=e252s5 -mr=make

Step 2 If the Global Hot Spare is created

successfully, you find that the value of [Status] is

changed to [Hot Spare] and new item [Hot Spare

Information] appears with value [Global].

Use the “property” command to refer to the property of Physical Device.

Slot

: 5

ID : 21

Device Type : HDD

Interface : SAS

Vendor/Model : SEAGATE ST9146853SS

Firmware Version : N002

Serial Number : 6XM00WA8

Capacity : 33GB

Status : Hot Spare

Hot Spare Information : Global

S.M.A.R.T. : Normal

Power Status : On

>raidcmd hotspare -c=1 -p=e252s5 -mr=make

Make Global Hot Spare.

Do you continue ? [yes(y) or no(n)] : yes

>raidcmd property -tg=pd -c=1 -p=e252s5

RAID Controller #1 Physical Device e252s5

Enclosure : 252

Enclosure Position : Internal

-tg : Specify pd to refer to the property of Physical Device.

-c : Number of the RAID Controller to which the Physical Device is connected

-p : Number of the Physical Device

Ex. Refer to the property of the Physical Device with RAID Controller number:1 and Physical Device number: e252s5.

raidcmd property -tg=pd -c=1 -p=e252s5

Making Dedicated Hot Spare

The procedure of making a Dedicated Hot Spare is described below.

RAID Viewer

Step 1 Start the RAID Viewer. Click a Physical Device with [Status] being [Ready] on the Tree View.

Step 2 Select [Hot Spare] on the [Control] menu

and click [Make Dedicated Hot Spare...].

Step 3 The [Make Dedicated Hot Spare] dialog

box appears. Check the check box of the Disk Array

for which a Dedicated Hot Spare is to be made. The

Dedicated Hot Spare may be made for more than

one Disk Array.

The capacity of the Physical Device to be used as a

Hot Spare must be the same as that of the Physical

Device being used in the target Disk Array.

Click [OK] to make the Dedicated Hot Spare.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 134 135

Commentaires sur ces manuels

Pas de commentaire

NEC Express5800/R110f-1E Manuel d'utilisateur Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs RAID NEC Express5800/R110f-1E