NEC Display Wall Calibrator Guide de l'utilisateur télécharger pdf (Page 58)

58 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

The Power tab controls the power settings of the displays.

Clicking the On button will turn the display or displays on. Clicking the Off button will turn the display or displays off.

When Apply To: Display is selected the current power state of the display is shown.

Power Saving settings can be set using either the Power Saving Mode or Power Save controls, depending on the

model of display being used.

The Power On Delay time can be adjusted for individual displays, or for all displays in the entire project. This

control sets the time delay is seconds for the display to when the main display circuits are switched on after power

on.

Display Settings dialog

The Display Settings dialog is accessed from the Edit menu, and is divided into several different tabs representing

different functionality. Various settings on the displays can be set and read from this dialog. Settings can be applied

to either a single display, or to all of the displays in the current project by selecting either Apply To: Display or All

Displays.

Note: Not all controls will be available on all display models, display modes, or video inputs. Unavailable controls will be

show as disabled.

Note: When Apply To: All Displays is selected, some controls are not updated until the associated update button is

clicked.

Display Settings dialog - Power tab

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 91 92

Pas de commentaire

NEC Display Wall Calibrator Guide de l'utilisateur Page 58