NEC Display Wall Calibrator Guide de l'utilisateur télécharger pdf (Page 48)

48 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

Preferences dialog - Interface tab

Luminance Units - Selects the units that luminance values are displayed in. Options are:

• Candelas (cd/m²)

• Foot Lamberts (fL)

Check For Updates - When selected, the software will automatically check every two weeks when run to see if a new

version is available online. An Internet connection is required.

Play voice prompts during calibration - When selected, the software will play voice prompts during the calibration

process indicating when to position and remove the color sensor from the display screen. This is useful when it is not

practical to look at the application while the displays are being calibrated. A PC with sound output capabilities is required.

Measure each display after calibration - Selecting this option will measure each display after it has been adjusted

during calibration. This is for calibration analysis purposes only and will not impact the display calibration other than

increasing the overall calibration time due to the increased number of measurements. Use this option only when asked

to do so in order to provide calibration accuracy results for analysis purposes. The measurement results are stored

within the project le.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

Pas de commentaire

NEC Display Wall Calibrator Guide de l'utilisateur Page 48