NEC Express5800/R120f-1M Guide de l'utilisateur télécharger pdf (Page 32)

4. Names and Functions of Parts

Express5800/R120f-1M User’s Guide

Chapter 1 General Description

4.7

Status Indicators

4.7.1

POWER LED ( )

POWER LED indicates power ON/OFF status of the server.

POWER LED pattern

Description

On (green) The server is normally powered on.

Off The server is off-powered.

The server is in halt status.

4.7.2

STATUS LED 1,2 ( )

While hardware is operating normally, STATUS LED 1 lights green. STATUS LED 2 is off. STATUS LED 1 is

off or STATUS LED 2 lights/flashes amber if there is a hardware failure.

Tips

If NEC ESMPRO is installed, you can view

error logs to check the causes of

failures.

STATUS LED 1,2 pattern

Description Solution

STATUS LED 1

STATUS LED 2

On (green) Off The server is operating normally. −

On (green) On (amber) Initialization of BMC is in progress. Wait until initialization completes.

Flashing (green)

Off

Memory is in a degraded state

Identify the device in degraded state by using

BIOS Setup Utility (SETUP)

, and replace it as

soon as possible.

A correctable memory error has often

occurred.

Operating while CPU error is detected.

In redundant power configuration, power is

not supplied to either of power unit.

Off Off

The power is off.

Turn on the server.

POST is in progress. Wait for a while. STATUS LED

will turn green

after POST completes.

Watchdog timer expired. Turn the power off and then turn it on.

If POST screen displays any

error message,

take notes of the

message, and contact your

sales representative.

Memory dump is being requested.

(e.g. when DUMP Switch is pressed)

Note: It remains green if the dump is caused

by software.

Wait until the memory dump is completed.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 132 133

Commentaires sur ces manuels

Pas de commentaire

NEC Express5800/R120f-1M Guide de l'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs NEC Express5800/R120f-1M