Nec Network Controller uPD98502 Manuel d'utilisateur télécharger pdf (Page 336)

100

101

CHAPTER 6 USB CONTROLLER

336

Preliminary User’s Manual S15543EJ1V0UM

Figure 6-6. Configuration of Transmit Buffer Directory

-Tx Buffer Directory

Directory Address

-Tx Link Pointer

Reserved

31 0

Buffer Descriptor N

Buffer Descriptor 4

Buffer Descriptor 3

Buffer Descriptor 2

Buffer Descriptor 1

Buffer Descriptor 0

Link Pointer

-Tx Buffer Descriptor

31 016 15

Buffer Address

L Size

1 Reserved

30 29

31 30 29

0 0

Tx Buffer Directory: This is the Tx buffer directory. It contains the buffer descriptor and the link pointer. A

single Tx Buffer Directory can accommodate up to 255 buffer descriptors.

Tx Buffer Descriptor: This is the Tx buffer descriptor. It maintains the data in the Tx BUFFER.

When Bit 31 (Last bit) is set, the Buffer Descriptor indicates the last buffer in a packet.

Bit30 is used to discriminate between the Buffer Descriptor and Link Pointer. When set to

1, this bit indicates the Buffer Descriptor.

The "Size" field indicates the buffer size. As the buffer size, a value between 1 and 65535

bytes can be set. The "Buffer Address" field indicates the start address of the buffer.

Tx Link Pointer: This is the link pointer. It points to the next packet directory.

Bit31 is usually set to 0.

Bit30 is used to discriminate between the Buffer Descriptor and Link Pointer. When set to

0, this bit indicates the Link Pointer.

The "Directory Address" field indicates the start address of the next Buffer Directory.

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 594 595

Commentaires sur ces manuels

Pas de commentaire

Nec Network Controller uPD98502 Manuel d'utilisateur Page 336

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Nec Network Controller uPD98502