NEC Express5800/R120d-2M Guide d'installation télécharger pdf (Page 183)

5. Setting Up Windows Server 2003 R2 x64 Edition

Express5800/R120d-1M, R120d-2M Installation Guide (Windows)

183

Chapter 1 Installing Windows

6. Select [Search for the best driver in these locations], and [Include this location in the search]. Enter the

following location and click [Next].

● When using EXPRESSBUILDER DVD:

Optical disk drive: \021\win\winnt\w2k3amd\lan\bcom\drvinst\14060401\x64\win2003\x64

● When applying Starter Pack from Internal Flash Memory:

System drive: \StartPKG\w2k3amd\lan\bcom\drvinst\14060401\x64\win2003\x64

Note

Be sure to uncheck the [Search removable media (floppy, CD-ROM...)] check box,

if checked.

7. Click [Finish].

8. When you have applied LAN driver to every [! Ethernet Controller], remove EXPRESSBUILDER DVD

from the optical disk drive, and restart the system.

Installing Starter Pack now completes.

Important

[! Ethernet Controller] may not be displayed in Device Manager after LAN

card or riser card has been installed

. In such a case, the LAN driver is

installed automatically. Make sure that the network adapt

er name for LAN

card/riser card is found on [(Network Adapter Name)] under [Network

Adapters] tab.

(3) Network adapter name

After installing the LAN drivers, the following network adapter names will be displayed by the Device Manager or

BACS.

Network adapters for the standard configuration

Broadcom NetXtreme Gigabit Ethernet #xx*

If connecting with an optional LAN board:

[N8104-132/138] Broadcom NetXtreme Gigabit Ethernet #xx*

If connecting with an optional Riser Card:

[N8104-135] Broadcom NetXtreme Gigabit Ethernet #xx*

* If there are adapters with the same name, a different identification number will be assigned to xx.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 290 291

Pas de commentaire

NEC Express5800/R120d-2M Guide d'installation Page 183