NEC Express5800/R110f-1E Manuel d'utilisateur télécharger pdf (Page 23)

slotlamp

[Overview]

Turns on or off the DISK lamp of the computer or enclosure in which Physical Devices are installed.

[Format]

raidcmd slotlamp -c=<controller> -p=<physicaldevice> -sw={on|off}

Command Parameter Description

-c=<controller> Specify the RAID Controller to be processed.

<controller> : RAID Controller Number

-p=<physicaldevice> Specify the Physical Device to be processed.

<physicaldevice> : Physical Device Number

-sw={on|off}

Specify that the lamp is turned on or off.

on: Turns on the lamp.

off: Turns off the lamp.

[Description]

Turns on or off the DISK lamp on the computer or enclosure in which the specified Physical Device is installed.

Executing the raidcmd with -sw=on while the DISK lamp is already ON causes the command to terminate

normally.

Executing the raidcmd with -sw=off while the DISK lamp is already OFF causes the command to terminate

normally.

1 2 ... 18 19 20 21 22 23 24 25

Pas de commentaire

NEC Express5800/R110f-1E Manuel d'utilisateur Page 23