NEC Express5800/R120f-1M Guide d'installation télécharger pdf (Page 343)

Glossary

Express5800/R120f-1M, R120f-2M Installation Guide (Windows)

343

Glossary

Terms Description

BIOS Setup Utility (SETUP) Software for setting BIOS. You can run this software by pressing <F2> key during POST.

BMC

Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI

version 2.0 protocol. BMC can manage the server hardware.

BMC RESET Switch

A switch for resetting the BMC of the server. This resets the BMC without clearing the

BMC settings.

Use the switch if the problem on the BMC occurs.

DUMP Switch

A switch that is used for collecting the memory dump if an error occurs. You can specify

the destination of the dump by using the OS function.

EXPRESSBUILDER

Standard software for setting up the server easily. This also includes several useful

applications and instruction manuals.

EXPRESSSCOPE ENGINE 3 A name of BMC for NEC Express5800 series.

EXPRESSSCOPE Profile Key

A removable flash memory that stored the settings of BIOS and BMC. If the motherboard

of the server is replaced, you can use former settings when moving this flash memory

from the former motherboard.

Express Report Service

Software that can report the server failure to the contact center by E-mail or modem. This

software is installed with NEC ESMPRO ServerAgentService to the server.

Express Report Service (HTTPS)

Software that can report the server failure to the contact center by HTTPS. This software

is installed with NEC ESMPRO ServerAgentService to the server.

Express Report Service (MG)

Software that can report the server failure to the contact center by E-mail, modem or

HTTPS without NEC ESMPRO ServerAgentService. This software is installed with NEC

ESMPRO Manager to "PC for Management".

ExpressUpdate

A feature for updating BIOS, firmware, driver, or software of the server. This feature is

available when NEC ESMPRO Manager

cooperates with EXPRESSSCOPE ENGINE 3

and ExpressUpdate Agent.

ExpressUpdate Agent Software for performing ExpressUpdate. This is installed to the server.

Flash FDD An optional USB device that can use as a floppy disk drive.

Internal Flash Memory

A built-in flash memory that stored EXPRESSBUILDER as standard. You can start

EXPRESSBUILDER from it without DVD when pressing <F3> key during POST.

NEC ESMPRO

Standard software for the server management. This consists of several applications for

managing or monitoring.

NEC ESMPRO Agent

Software for monitoring the server. This works with NEC ESMPRO Manager and resides

as the OS service.

NEC ESMPRO Agent Extension

Software for performing the scheduled operations. This works with NEC ESMPRO

Manager.

NEC ESMPRO Manager Software for managing plural servers on network.

NEC ESMPRO

ServerAgentService

Software for monitoring the server. This works with NEC ESMPRO Manager. You can

choose Service Mode or Non-Service Mode when installing this software. Service Mode

resides as the OS service and Non-Service Mode does not use the OS service to reduce

the OS resources such as memory or CPU.

OEM driver A Windows driver for the mass storage device.

OS standard installer

An installer that stored in Windows installation disc. Use this installer if you want to install

the OS manually.

Offline tools

Software that can confirm or change IPMI data such as SEL, SDR, or FRU. You can start

Offline tools when pressing <F4> key during POST.

PC for Management

A computer for managing the server on network. A general Windows/Linux computer can

be used as "PC for Management".

Product Info Collection Utility

Software for collecting several hardware/software statuses or event logs. You can easily

collect the data for the server maintenance by using this software.

RAID Configuration Utility Software for configuring RAID arrays. You can run this software during POST.

Server Configuration Utility

Software for setting BIOS or BMC. You can use as Windows application or run this

software when pressing <F4> key during POST. This software is the same as BMC

Configuration of former models.

Starter Pack

Software package for the server. This software includes the customized drivers for

Windows. This must be installed before using Windows on the server.

TPM Kit An optional product of Trusted Platform Module for the server.

Universal RAID Utility

Software for setting RAID arrays on Windws/Linux. This software is operated on "PC for

Management" with NEC ESMPRO Manager.

Windows OS parameter file

A file that saved settings for installing Windows. You can install with the saved settings in

this file when setting Windows with EXPRESSBUILDER.

1 2 ... 338 339 340 341 342 343 344

Commentaires sur ces manuels

Pas de commentaire

NEC Express5800/R120f-1M Guide d'installation Page 343

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs NEC Express5800/R120f-1M