Nec GT1150 Manuel d'utilisateur télécharger pdf (Page 14)

E – 6

DVI

L/MONO

RGB 2

RGB 1

VIDEO 1

VIDEO 2

VIDEO

AUDIO OUT

R/Cr

G/Y

B/Cb

H/HV

MONITOR OUT

L/MONO

1. DVI Connector

This connector can be used to accept digital or analog signal output

from a computer with a DVI connector.

2. DVI Audio Input Jacks (RCA)

These are the left channel and the right audio inputs for stereo sound

coming from the equipment connected to a computer with DVI output.

L/MONO

This is your left channel audio input for stereo sound from the equip-

ment connected to a computer with DVI output.

The L/MONO jack also serves as your monaural audio input.

This is your right channel audio input for stereo sound from the equip-

ment connected to a computer with DVI output.

3. RGB 2 Connector (Mini D-Sub 15 pin)

Connect your PC, Macintosh, DVD player with Y/Cb/Cr outputs or other

RGB equipment. The optional Component V. Cable is required for Y/

Cb/ Cr input connection.

NOTE:

The RGB2 connector does not support the Switcher Control mode.

4. RGB 2 Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the

RGB Input 2 source.

This also serves as your monaural audio input.

This is your right channel audio input for stereo sound from the RGB

Input 2 source.

Front Terminal Panel (Right)

5. MONITOR OUT Connector (Mini D-Sub 15

pin)

You can use this connector to loop your computer

image an external monitor from either the RGB 1,

RGB 2 or DVI analog input source.

6. RGB 1 Input Connectors (BNC)

Connect R,G,B,H (Horizontal sync) and V (Vertical

sync) outputs of external equipment such as the NEC

ISS-6020Switcher.

If using a component with a combined sync (SYNC)

output, connect it to the H/V terminal. When using

luminance and color-difference signals of HDTV and

DVD, connect Pr/Cr to the R,Y to the G and Pb/Cb

to the B input of the projector.

7. RGB 1 Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound

coming from the RGB Input 1 source.

This also serves as your monaural audio input.

This is your right channel audio input for stereo sound

from the RGB Input 1 source.

8. VIDEO 1 Input Connector (BNC)

Connect a VCR, DVD player, laser disc player, or

document camera here to project video.

9. VIDEO 2 Input Connector (RCA)

Connect a VCR, DVD player, laser disc player, or

document camera here to project video.

10. VIDEO Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the

VIDEO 1 or VIDEO 2 source.

This also serves as your monaural audio input.

This is your right channel audio input for stereo sound from the VIDEO

1 or VIDEO 2 source.

11. S-VIDEO Input Connector (Mini DIN 4 pin)

Here is where you connect the S-Video input from an external source

such as a VCR or laser disc player.

NOTE: S-Video provides more vivid color and higher resolution than the tradi-

tional composite video format.

12. S-VIDEO Audio Input Jacks (RCA)

L/MONO

This is your left channel audio input for stereo sound coming from the

S-VIDEO source.

This also serves as your monaural audio input.

This is your right channel audio input for stereo sound from the S-

VIDEO source.

13. AUDIO OUT Jacks (RCA)

You can use this connector to output sound from the currently selected

input source (RGB 1, RGB 2, VIDEO 1, VIDEO 2, S-VIDEO or DVI

[digital/analog] ). Output sound level can be adjusted in accordance

with the sound level of the internal speaker.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 78 79

Commentaires sur ces manuels

Pas de commentaire

Nec GT1150 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Nec GT1150