NEC NP-UM330X Manuel d'utilisateur télécharger pdf (Page 105)

5. Using On-Screen Menu

TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP.)]

WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUTER

INinputwillpowerontheprojectorandsimultaneouslyprojectthecomputer’simage.

ThisfunctionalityeliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolortheprojectorcabinet

topowerontheprojector.

Tousethisfunction,rstconnectacomputertotheprojectorandtheprojectortoanactiveACinput.

NOTE:

• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-

binationoftheAUTOPOWEROFFfunction.

• Thisfunctionwillnotbeavailableunderthefollowingconditions:

- whenacomponentsignalisappliedtotheCOMPUTERINconnector

- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

• ToenabletheAUTOPOWERON(COMP.)afterturningofftheprojector,wait3secondsandinputacomputersignal.

 Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)willnotworkandtheprojector

remainsinstandbymode.

EnablingPowerManagement[AUTOPOWEROFF]

Whenthisoptionisselectedyoucanenabletheprojectortoautomaticallyturnoff(attheselectedtime:5min.,10min.,

20min.,30min.,60min.)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.

SelectingDefaultSource[DEFAULTSOURCESELECT]

Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.

LAST �� Sets the projector to default to the previous or last active input each time the projector is turned on�

AUTO �� Searches for an active source in order of COMPUTER → HDMI1 → HDMI2 → VIDEO → S-VIDEO → VIEWER

→ USB DISPLAY → COMPUTER and displays the ﬁrst found source�

COMPUTER �� Displays the computer signal from the COMPUTER IN connector every time the projector is turned on�

HDMI1 �� Displays the digital source from the HDMI 1 IN connector every time the projector is turned on�

HDMI2 �� Displays the digital source from the HDMI 2 IN connector every time the projector is turned on�

VIDEO �� Displays the Video source from the VIDEO IN connector every time the projector is turned on�

S-VIDEO �� Displays the Video source from the S-VIDEO IN connector every time the projector is turned on�

VIEWER �� Displays slides or plays back movie ﬁles from the USB memory device every time the projector is turned

on�

NETWORK �� Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�

USB DISPLAY �� Displays the computer signal from the USB (PC) port every time the projector is turned on�

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 148 149

Pas de commentaire

NEC NP-UM330X Manuel d'utilisateur Page 105