NEC Express5800/GT110e-S Guide d'installation télécharger pdf (Page 229)

6. Setting Up Windows Server 2003

Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)

229

Chapter 1 Installing Windows

6. Select [Search for the best driver in these locations], and [Include this location in the search]. Enter the

following location and click [Next].

● When using EXPRESSBUILDER DVD:

Optical disk drive:\024\win\winnt\dotnet\lan\bcom\drvinst\15000401\ia32\win2003\ia32

● When applying Starter Pack from internal flash memory:

System drive: \StartPKG\dotnet\lan\bcom\drvinst\15000401\ia32\win2003\ia32

Note

Be sure to uncheck the [Search removable media (floppy, CD-ROM...)] check box,

if checked.

7. Click [Finish].

8. When you have applied LAN driver to every [! Ethernet Controller], remove EXPRESSBUILDER DVD

from the optical disk drive, and restart the system.

Installing Starter Pack now completes.

Important

[! Ethernet Controller] may not be displayed in Device Manager after LAN

card or riser card has been installed

. In such a case, the LAN driver is

installed automatically. Make sure that the network adapter name for LAN

card is found on [(Network Adapter Name)] under [Network Adapters] tab.

(3) Network adapter name

After installing the LAN drivers, the following network adapter names will be displayed by the Device Manager or

BACS.

Network adapters for the standard configuration

Broadcom NetXtreme Gigabit Ethernet #xx*

If connecting with an optional LAN board:

[N8104-132/133/138] Broadcom NetXtreme Gigabit Ethernet #xx*

* If there are adapters with the same name, a different identification number will be assigned to xx.

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 274 275

Pas de commentaire

NEC Express5800/GT110e-S Guide d'installation Page 229