NEC Express5800/R110d-1E Guide de l'utilisateur Page 94

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 106
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 93
94
Operation when failed Physical Device is replaced to recover RAID System
Using the RAID System continuously with the redundancy of a Logical Drive remaining degraded may cause the data in the Logical Drive to be lost when another Physical Device is
failed further. Recover a Logical Drive of degraded redundancy by Hot Spare or replacement of the failed Physical Device.
If Hot Spare or replacement of a failed Physical Device operates Rebuild, the status of the Physical Device changes during the rebuilding (with its [Status] changed to [Rebuilding]).
Figure 24 Display of RAID Viewer /raidcmd (Rebuilding of Physical Device)
Become [Warning] by
existence of
[Degraded] node.
> raidcmd property -tg=ld -c=1 -l=1
RAID Controller #1 Logical Drive #1
ID : 0
Physical Device Number : 1, 2, 3
Disk Array Number : 1
RAID Level : 5
Stripe Size : 64KB
Capacity : 146GB
Cache Mode (Current) : Write Back
Cache Mode (Setting) : Auto Switch
Status : Degraded
>
Structure and Status of RAID System
Tree View of RAID Viewer
Property of RAID Viewer
#4
[Rebuilding]
#3
[Ready]
(Failed)
#1 [Degraded]
RAID Level: 5
#1
[Online]
#2
[Online]
Dedicated Hot Spare
[Rebuilding]
Logical Drive
[Degraded]
Failed Physical
Device
[Ready]
> raidcmd property -tg=pd -c=1 -p=3
RAID Controller #1 Physical Device #3
ID : 0
Enclosure : 1
Slot : 3
Device Type : HDD
Interface : SAS
Vendor/Model : Seagate ST12345678
Firmware Version : BK09
Serial Number : 1111
Capacity : 146GB
Status : Ready
S.M.A.R.T. : Normal
>
> raidcmd property -tg=pd -c=1 -p=4
RAID Controller #1 Physical Device #4
ID : 0
Enclosure : 1
Slot : 4
Device Type : HDD
Interface : SAS
Vendor/Model : Seagate ST12345678
Firmware Version : BK09
Serial Number : 1111
Capacity : 146GB
Status : Rebuilding
S.M.A.R.T. : Normal
>
Property of raidcmd
After Rebuild starts, various results such as [Status]
changes [Ready] cannot recognize existence, and
[Status] keep [Failed] are thought by RAID
Controller's kind and the kind of the occurring issue
Vue de la page 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 105 106

Commentaires sur ces manuels

Pas de commentaire