NEC Express5800/120Li Guide de l'utilisateur télécharger pdf (Page 29)

Operation 25

3.2.3 Properties /Operations/Graphical View

The Properties/Operations/Graphical view indicates the information on controllers and drives

selected in the Physical/Logical View in the Properties view, the setups/executions of available

features in the Operations view, and the capacities of graphical drives in the Graphical view.

 Properties

Indicate the information on selected controllers and drives.

 Operations

Allows you to set or execute features available for the selected controllers and drives.

IMPORTANT: Setup/execution of feature

In the setup/execution of a feature on the Operations view,

select the desired feature from the menu shown to the left,

change the setting on the window shown to the right if

necessary and select [Go].

The menu displayed in the Operations view varies depending on the states of the selected

objects and/or drives. Sample menus are shown below.

When controller is selected:

[Enable Alarm]:

Enable the alarm feature.

[Disable Alarm]:

Disable the alarm feature.

[Silence Alarm]:

Stop the alarm when it beeps.

[Flash Firmware]:

Update the firmware of the controller.

This operation is dedicated for maintenance. Do not use the feature.

[Set Patrol Read Properties]:

Allow you to set the Patrol Read schedule. See Section "3.5.2 Scheduling Patrol Read"

for the schedule setting.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 76 77

Pas de commentaire

NEC Express5800/120Li Guide de l'utilisateur Page 29