Upgrading Your Server 9-7
SAS hard disk drive
Can be used only when the optional RAID Controller (N8103-116A/117A/118A) is installed. Up to
three hard disk drives (mounted on the dedicated 3.5-inch width tray) can be installed.
IMPORTANT: Use the hard disk drives authorized by NEC. Installing
a third-party hard disk drive may cause a failure of the server as well as
the hard disk drive. Purchase hard disk drives of the following models:
– N8150-200 (73.2GB, 15000 rpm, SAS)
– N8150-201 (146.5GB, 15000 rpm, SAS)
– N8150-226 (300GB, 15000 rpm, SAS)
– N8150-245 (450GB, 15000 rpm, SAS)
The hard disk drive bays are connected to the Mini SAS connector on the mother board.
To use the hard disk drives in a RAID System, refer to:
When using the Onboard RAID Controller (LSI Embedded MegaRAID):
Use LSI Software RAID Configuration Utility or Universal RAID Utility to build,
configure, and manage the RAID System.
See "RAID System Configuration" in Chapter 4 and "Universal RAID Utility" in Chapter
6.
When using an optional RAID Controller (N8103-116A/117A/118A):
Use WebBIOS or Universal RAID Utility to build, configure, and manage the RAID
System.
Refer to the manual coming with the optional RAID Controller, or see "Universal RAID
Utility" in Chapter 6.
Commentaires sur ces manuels