Nec WT600 Manuel d'utilisateur télécharger pdf (Page 7)

iii

What's in the Box?

Make sure your box contains everything listed. If any pieces are

missing, contact your dealer.

Please save the original box and packing materials if you ever

need to ship your WT600 Projector.

Remote control

(7N900362)

Power cable

(North America: 7N080204)

(Europe: 7N080003)

Projector

Remote Control Cable

(07N520019)

CD-ROM (7N950108)

Projector User Supportware

USB cable

(7N520013)

Setup

Guide

NEC

Software Utility

Installation Guide

User's

Manual

Batteries

For North America only

Registration card

Limited warranty

For Europe only

Guarantee policy

RGB signal cable

(7N520012

ASPECT

REFORM

HELP

OIN

VOLUME

MAG

ZOOM

PIC

-MU

SLIDE

IDE

LIST

ELE

REE

DVI-D signal cable

(7N520007)

Fire and Shock Precautions

1. Ensure that there is sufficient ventilation and that vents are

unobstructed to prevent the build-up of heat inside your pro-

jector. Allow at least 4 inches (10 cm) of space between your

projector side and a wall.

2. Prevent foreign objects such as paper clips and bits of paper

from falling into your projector.

Do not attempt to retrieve any objects that might fall into your

projector. Do not insert any metal objects such as a wire or

screwdriver into your projector. If something should fall into

your projector, disconnect it immediately and have the object

removed by a qualified NEC service personnel.

3. Do not place any liquids on top of your projector.

4. Do not look into the mirror or the light source while the pro-

jector is on. Serious damage to your eyes could result.

5. Do not block the light path between the light source and the

final mirror with any objects. Doing so could cause the object

to catch on fire.

6. The projector is designed to operate on a power supply of

100-120 or 200-240 V 50/60 Hz AC. Ensure that your power

supply fits this requirement before attempting to use your

projector.

7. Handle the power cable carefully and avoid excessive bend-

ing.

A damaged cord can cause electric shock or fire.

8. If the projector is not to be used for an extended period of

time, disconnect the plug from the power outlet.

CAUTION

1. Do not try to touch the ventilation outlet on the both sides as

it can become heated while the projector is turned on.

2. Do not attempt to move or carry the projector using the mir-

ror cover.

Doing so can result in the projector overturning and causing

injury. Using the two side handles is the proper way to move

the projector.

When carrying or transporting the projector, close and lock

the mirror cover with the mirror cover lock switch.

3. The carrying handles are designed for the purpose of carry-

ing the projector.

Do not hang from the projector by the carrying handles in a

ceiling mounted installation. Doing so may result in the car-

rying handles separating from the unit or the projector may

separate from the mount resulting in personal injury.

4. Enable High-Speed Fan mode if you continue to use the pro-

jector for consecutive days. (From the Advanced menu, se-

lect [Projector Options] → [Setup] → [Page 4] → [High Speed

Fan Mode].)

5. Do not unplug the power cable from the wall outlet under any

one of the following circumstances.

Doing so can cause damage to the projector:

* While the Hour Glass icon appears.

* While the message "Please wait a moment." appears. This

message will be displayed after the projector is turned

off.

* While the cooling fans are running. (The cooling fans con-

tinue to work for 90 seconds after the projector is turned

off).

6. Do not eject the PC card or LAN card while its data is be-

ing accessed. Doing so can damage your PC card or LAN

card.

Lamp Replacement

• To replace the lamp, follow all instructions provided on page

7-1.

• Be sure to replace the lamp when the message "The lamp

has reached the end of its usable life. Please replace the

lamp." appears. If you continue to use the lamp after the

lamp has reached the end of its usable life, the lamp bulb

may shatter, and pieces of glass may be scattered in the

lamp case. Do not touch them as the pieces of glass may

cause injury.

If this happens, contact your NEC dealer for lamp replace-

ment.

• Allow a minimum of 90 seconds to elapse after turning off

the projector. Then turn off the main power switch, discon-

nect the power cable and allow 60 minutes to cool the pro-

jector before replacing the lamp.

Important Information

Stickers (Use as appropriate)

Mirror cleaning cloth (24BS7251)

Dust-proof cover (24BS7271)

DVI-A to VGA signal

cable

(7N520011)

1 2 3 4 5 6 7 8 9 10 11 12 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Nec WT600 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs Nec WT600