NEC PD Comms Tool Guide de l'utilisateur télécharger pdf (Page 43)

43 | NEC PD COMMS TOOL - USER’S GUIDE

addresses in decimal format:

FOREACHPORT xxx.xxx.xxx.xxx TO yyy.yyy.yyy.yyy

# commands to perform on each IP address.

ENDFOREACHPORT

Example:

FOREACHPORT 192.168.0.10 TO 192.168.0.20

SETMONITORID "All"

SETPOWER ON

ENDFOREACHPORT

Sets the Power to On for all displays between the specied IP addresses.

SETMONITORID command

This command sets the Monitor ID of the display(s) to perform commands on. Use the following syntax to specify the

Monitor ID where xx is a specic ID number, or “All”, or groups such as “Group A”.

SETMONITORID xx

When using “All” or “Group x”, the text must be enclosed by “”. For example: SETMONITORID “All”

Examples:

SETMONITORID 1

SETMONITORID "All"

SETMONITORID "Group A"

SETPOWER command

This command sets the power status of the display(s). Use the following syntax where xx is either ON, OFF, or STANDBY.

SETPOWER xx

Examples:

SETPOWER ON

SETPOWER OFF

SETPOWER STANDBY

SETDATETIME command

This command sets the internal clock on the display(s) to the current system date and time. The syntax is as follows:

SETDATETIME

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 61 62

Pas de commentaire

NEC PD Comms Tool Guide de l'utilisateur Page 43