NEC Express5800/320Lb Linux Guide de l'utilisateur télécharger pdf (Page 46)

Step 4

From the client computer start the command prompt (Start->Run->cmd) and type

in the following:

cd C:\Program Files\nec\clptrek\etc\

<Linux>

From the client computer type in:

cd /opt/nec/clptrek/etc/

Step 5

Connect to the server using ftp <IP address> with the user name as “sreadmin”

and password “sreadmin”

e.g. ftp 10.123.187.1

Note:

If you encounter the error: “ftp: connect : Connection refused” you missed the

pre-requisite stated above. Please refer to Appendix E: Starting the ftp daemon

to start the wu-ftpd daemon on the server, and repeat Step 5.

Step 6

ftp> mput clp.conf

Step 7

Quit out of ftp typing in bye:

ftp> bye

Step 8

On the FT-Linux server, execute the following command:

/opt/nec/clusterpro/management/sre-push

Hit Return when prompted as below:

…

Need to shutdown system and reboot

please shutdown system after push. (hit return) : <HIT RETURN HERE>

file delivery to server 127.0.0.1 success.

…

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 96 97

Pas de commentaire

NEC Express5800/320Lb Linux Guide de l'utilisateur Page 46