NEC Express5800/S120R-2 Guide de l'utilisateur télécharger pdf (Page 43)

Chapter 5: Advanced Serverboard Setup

5-9

Figure 5-3b. Top View of DDR Slot

Top View of DDR2 FBD Slot

5-6 Adding PCI Cards

1. PCI Expansion Slots

The X7DB3 has six PCI expansion slots, which includes two x8 PCI-Express slots,

one x4 PCI-Express slot, two PCI-X 133 MHz slots and one PCI-X 100 MHz slot.

The SC825TQ-560LP/SC825TQ-R700LP chassis can accommodate up to seven

low-proﬁ le PCI expansion cards. PCI cards are installed directly to the serverboard

(riser cards are not needed).

2. PCI Card Installation

Before installing a PCI add-on card, make sure you install it into a slot that supports

the speed of the card (see step 1, above). Begin by removing the screw that se-

cures the PCI slot shield to the chassis. Insert the expansion card into the correct

slot on the serverboard, pushing down with your thumbs evenly on both sides of the

card. Finish by securing it to the IO backplane with the screw you removed from

the shield. Follow this procedure when adding a card to other slots.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 125 126

Pas de commentaire

NEC Express5800/S120R-2 Guide de l'utilisateur Page 43