Nec FE750 Plus Manuel d'utilisateur télécharger pdf (Page 8)

Color Control/AccuColor

Control System

Color presets 1 through 5 selects the desired color setting. The bar is replaced

by the color setting choice from 1 to 5. Each color setting is adjusted at the

factory to the stated Kelvin. If a setting is adjusted, the name of the setting will

change from Kelvin to Custom.

Red, Green, Blue: AccuColor Control System decreases or increases the

monitor's red, green or blue color guns depending upon which is selected. The

change in color will appear on screen and the direction (decrease or increase)

will be shown by the bars.

sRGB Mode: sRGB mode provides the suitable color managed picture image.

You can not change Red, Green and Blue colors individually.

Geometry Controls

Geometry Controls Menu

The Geometry controls allow you to adjust the curvature or angle of the sides of

your display.

Sides In/Out (pincushion): Decreases or increases the curvature of the sides either

inward or outward.

Sides Left/Right (pincushion balance): Decreases or increases the curvature of

the sides either to the left or right.

Sides Tilt (parallelogram): Decreases or increases the tilt of the sides either to the

left or right.

Sides Align (trapezoidal): Decreases or increases the bottom of the screen to be

the same as the top.

Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise.

Tools 1

Moiré Canceler: Moiré is a wavy pattern which can sometimes appear on the screen.

The pattern is repetitive and superimposed as rippled images. When running certain

applications, the wavy pattern is more evident than in others. To reduce moiré, adjust

the level by using –/+ CONTROL buttons.

Basic Convergence:

Aligns all three colors (R,G,B) to form a single color (white).

The purpose of this control is to ensure that a white line drawn on the screen is

as crisp and clear as possible.

• Use the Horizontal control to adjust the alignment of the white lines in the

up/down direction.

• Use the Vertical control to adjust the alignment of the white lines in the left/

right direction.

Corner Correction:

Allows you to adjust the geometry of the corners of your

display — Top, Top Balance, Bottom or Bottom Balance.

Auto Save:

The monitor automatically saves the last settings of the user controls.

You can turn this Auto Save feature off by selecting this menu and changing the

off position. When the off mode is selected, you will prompted with the option to

Controls –continued

Fe750+.wpc 11/1/00, 10:45 AM8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Nec FE750 Plus Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs Nec FE750 Plus