NEC NP43 Spécifications

====================================================================== Control Commands for NEC Projector (Basic) Rev 8.4.10a Copyright (C) NEC Dis

037-2. LAMP INFORMATION REQUEST 2 03H 94H 00H 00H 00H 97H 037-4. LAMP INFORMATION REQUEST 3 03H 96H 00H 00H 02H <DATA> CKS 037-7. L

33: NP110/NP115/NP215/NP216 (NP216 Series) 34: NP43/NP64 (NP64 Series) Meaning of Symbols---------------------------------------------------------

In case of GT series 50H In case of HT series 60H In case of WT series 70H In case of HT10 series D0H I

0 = No execution (Normal condition) 1 = During execution Bit 4: External control mode

DATA07 Type 1 of input terminal to be selected (!1) 01H : 1 02H : 2 03H : 3

Pattern ID Pattern Name MT LT LT180 LT80 HT GT WT VT NP1000 NP3150 NP905 NP4000 NP4100 NP62 NP64 NP3250 NP21602H Cross Hatch x * * x * x x x x * * * *

Data01 Data70 Data7101H 00H 03H MT1060/MT106501H 01H 03H MT86001H 02H 03H MT107501H 00H 06H NP1000/NP200002H 00H 03H LT240/LT26002H 01H 03H LT22002H 0

DATA72 PC Card insertion 00H : Not inserted 01H :

********************************************************************** Function: This command acquires the error information occurring with the projec

(!) LT/LT80/HT: "None" 015. POWER ON ********************************************************************** Function: This command swit

The following 3 kinds of connection methods are available for sending and receiving control commands. 1. Serial connection using the serial port on

DATA02 Switching number --------------------------------------------------------- When the switching object is the &quo

Supplement: * Picture mute is cancelled for the following: Input connector switching Video signal switching 021. PICTURE MUTE OFF **********

A2H 13H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 024. ONSCREEN MUTE ON *

*tint increment/decrement brightness contrast color tint<hue> sharpness Not supported "LT170","VT60

This command sets the volume. Command: 03H 10H 00H 00H 05H DATA01 .. DATA05 CKS (*3)

DATA05 Adjustment value (Upper ranking 8 bits) Response: At the time of a success 23H 10H 01H xxH 02H DATA01 DATA02 CKS

037. INFORMATION REQUEST ********************************************************************** Function: This command acquires the projector info

------------------------------------------------------------------- DATA01 .. 04 : Lamp Hour Meter(Normal mode) (second) DATA05 .. 08 : Reserved D

037-4. LAMP INFORMATION REQUEST 3 ********************************************************************** Function: This command acquires the inform

3) Change from HEX to Decimal - value will change to 18000 seconds Lamp's use of hours = 18000/3600 = 5 hours * In case of acquiring

(1) (2) (3-1) (3-2) (3-3) (3-4)GT50 00 /GT6 000 Ye s Ye s Y es Ye s Y es NoGT11 50 /GT2 150 Ye s No Y es Ye s Y es NoHT410/HT510 Yes No No No No NoHT1

(in terms of Eco mode values) Response: At the time of a success 23H 9BH 01H xxH 07H DATA01 to DATA07 CKS

A3H B0H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 039. LAMP MODE SET *

049. WXGA MODE SETTING SET ********************************************************************** Function: This command sets the WXGA Mode of pro

7. Table of Response Error Codes ---------------------------------------------------------------------- DATA01 DATA200H 00H Unknown command.00H 01H T

43 2BH 00H IMAGE 44 2CH 00H TEST 45 2DH

228 E4H 00H DVI/DVI (DIGITAL) (*6) (!!) 229 E5H 00H LAN

02H 0FH 00H 00H 02H DATA01 DATA02 CKS 051. CARBON SAVINGS INFORMATION REQUEST **********************************************************

060. GAIN PARAMETER REQUEST 2 ********************************************************************** Function: This command acquires the adjustment v

(! ) Acquirement itemsDATA01 DATA02 Acquirement name00H 00H Picture / Brightness01H 00H Picture / Contr

4CH 07H Color Correction / Yellow4CH 08H Color Correction / Magenta4CH 09H Color Correction / Cyan4CH 0AH Color Correction / White4DH 00H Through4EH 0

==================================================================== 3. Interface Conditions -----------------------------------------------------

077. MUTE CONTROL ********************************************************************** Function: This command controls the mute of picture, sound a

DATA01 DATA02 DATA0301H 00H 03H MT1060/MT106501H 01H 03H MT86001H 02H 03H MT107501H 00H 06H NP1000/NP200002H 00H 03H LT240/LT26002H 01H 03H LT22002H 0

DATA04 Sound function 00H : Not available 01H : Available DATA05 Calendar function

01H : Connected DATA09 .. 16 Reserved Response: At the time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS

DATA06 Test pattern display 00H : No display(Normal condition) 01H : Displaying DATA07 ..08 Reserved

078-5. MODEL NAME REQUEST ********************************************************************** Function: This command acquires the model name of

[079. FREEZE CONTROL] ********************************************************************** Function: This command controls the freeze. Command:

Command: 03H B0H 00H 00H 02H DATA01 DATA02 CKS Data Portion Contents ---------------------------------------------------------------

02H : BOTTOM-LEFT 03H : BOTTOM-RIGHT if DATA02 is SOURCE(02H) 00

111. AUTO ADJUST EXECUTE2 ********************************************************************** Function: This command executes the Auto Adjust.

+--------------+ Command +--------------+ | |-------------->| | | Controller | | Projector |

DATA02 DATA03 DATA13 DATA1400H 01H 00H 03H MT1060/106500H 01H 02H 03H MT86000H 01H 02H 03H MT107500H 01H 00H 06H NP1000/NP200000H 02H 00H 03H LT240/LT

DATA15 ... 16 Reserved Response: At the time of a failure A0H BFH 01H xxH 02H DATA01 DATA02 CKS

09H : SLOT2 0AH : SLOT3 0BH : SLOT4 0CH : DIGITAL2

A2H 00H 01H 20H 02H DATA01 DATA02 CKS ====================================================================== 6. Data Portion of Response ---

Command : This specifies a projector ID for the projector that sends and receives commands. (individual notification) Entering 00H or FFH becomes

* Data length : (12 Bit) This is data length of data portion (unit:: byte). Command : This sets data length of data added to a command to send it.

DATA01 Error types 00H : Not supported 01H : Parameter error 02H : Operation mode error 03H : Gain-rela

* Depending on the USB host controller in the personal computer, the USB connection may fail to operate. When using a USB hub, please use a self-power