NEC Express5800/1160Xd Guide de l'utilisateur télécharger pdf (Page 49)

System Operation 2-17

4. Start the OS loader by entering the directory file name, in this example,

setupldr.efi, at the fs0:\os prompt and press Enter.

fs0:\> cd os

fs0:\os> ls

Directory of fs0:\os

03/13/00 05:44p <DIR> 2,048 .

03/13/00 05:44p <DIR> 512 ..

12/22/99 00:58p r 635,392 setupldr.efi

1 File 635,392 bytes

2 Dirs 2,560 bytes

fs0:\os> setupldr

Figure 2-13. Starting the OS Loader from Shell

Notes for OS Installation

See the following notes requiring attention when installing the OS:

! Adding a SCSI card to a free slot and connecting a disk to the SCSI card

after the OS installation, might change the numbering of the disk and

prevent an OS boot from that disk.

! PCI14 slot is set to not run the Option ROM BIOS as default. Running

the Option ROM BIOS on the PCI114 slot requires changing the settings

of the slot with BIOS setup before booting the OS.

EFI Device Path

Each device installed in the system is managed with an “EFI Device Path.” The

following information describes EFI device paths.

See the following examples and Table 2-2 for device path formats for devices

conforming to EDD3.0 specification:

Example: SCSI cards and disks installed on the PCI bus:

Acpi(PNP0A03, 1)/Pci(2|0)/Scsi(Pun0,Lun0)/HD(Part1,SigFF050000)

Example: DVD-ROM device connected to the IDE Secondary channel:

Acpi(PNP0A03,0)/Pci(2|1)/Ata(Secondary,Master)/CDROM(Entry1)

Start OS Loader.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 213 214

Pas de commentaire

NEC Express5800/1160Xd Guide de l'utilisateur Page 49