NEC X462HB Manuel d'utilisateur télécharger pdf (Page 35)

English-33

English

Alert Mail Setting

http://<the Monitor’s IP address>/lanconfig.html

Checking [ENABLE] will turn on the Alert Mail feature.

Checking [DISABLE] will turn off the Alert Mail feature.

Type in the hostname of the network connected to the monitor.

Up to 60 alphanumeric characters can be used.

Type in the domain name of the network connected to the monitor.

Up to 60 alphanumeric characters can be used.

Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.

Type in the SMTP server name to be connected to the monitor.

Up to 60 alphanumeric characters can be used.

Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.

This selects the authentication method of the e-mail transmission.

This specifies the address of the POP3 server that is used in the authentication of the e-mail.

This sets the user name for logging into the authentication server when authentication is required

for the e-mail transmission. Up to 60 alphanumeric characters can be used.

This sets the password for logging into the authentication server when authentication is required

for the e-mail transmission. Up to 60 alphanumeric characters can be used.

Click this button to send a test mail to check if your settings are correct.

Click this button to reflect the above settings.

NOTE: Make sure to execute “the reboot” from the “reboot screen” or to turn the monitor off and

then back on to enable the changing, after clicking [Apply].

Alert Mail

Host Name

Domain Name

Sender’s Address

SMTP Server

Recipient’s Address

1 to 3

Authentication Method

POP3 Server

User Name

Password

TestMail

Apply

This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be

sent when an error occurs in the monitor.

NOTE: • If you execute a test, you may not receive an Alert mail.

Should this happen, check if the network settings are correct.

• If you entered an incorrect address in a test, you may not receive an Alert mail.

Should this happen, check if the Recipient’s Address is correct.

TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu.

For Control command diagram, please see file “External_Control.pdf” on the CD-ROM.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire

NEC X462HB Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Affichages publics NEC X462HB